IOs-LED Stripes 8mu – RESI-4LED-SIO
IOs Interface:
RS485:ASCII+MODBUS/RTU Slave
IOs-LED Strips:
12xLED Strips: 4 groups with 3 PWM outputs each
IOs-LED Stripes 8mu – RESI-4LED-SIO
IOs Interface:
RS485:ASCII+MODBUS/RTU Slave
IOs-LED Strips:
12xLED Strips: 4 groups with 3 PWM outputs each
- Modbus (RTU and Plus)
- Modbus-TCP
- Ethernet
- Field Bus
- RS485
- RESI Gateways
Our IO modules are designed for every application in the fields of building automation, industrial automation, and infrastructure. With a size of 4/8 or 12MU depending on the total amount of built-in I/O, these IO modules fit in any distribution cabinet. We only offer IO modules suitable for the 45 mm cut of a standard electrical panel board.
Basically, we deliver two versions of each IO module: one with a built-in RS485 interface with MODBUS/RTU slave protocol and another with an Ethernet interface and MODBUS/TCP protocol. All IO modules also support the ASCII protocol to use the IOs with a media control system or with an IoT controller using Node-RED, NodeJs, or Python. The Ethernet versions support, in addition to the MODBUS/TCP Server protocol, also the MODBUS/RTU protocol via Ethernet. All our modules have a wide range power supply of 12-48 V DC.
How are they configured?
Use our free RESIConfigurator software to parameterize and test our IO modules. We deliver a complete list of ASCII commands and a MODBUS register table with a detailed explanation for each product.
In this product group
You will find a special IO module to control up to 12 LED Strips with 12 PWM outputs. You can use LED strips with a common anode and power up to 60Vdc. The PWM outputs are divided into four groups. Each group has its own power supply, so you can mix different LED strips in one module.
Other references:
- RESI-4LED-ETH
Related products
Looking for more information about this product?
Complete the form, and we’ll contact you.
Contact Product Catalog Industrial Hardware
"*" indicates required fields